17 Signs You Work With Repairs To Upvc Windows
17 Signs You Work With Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum or timber.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good shape.
For single pane windows, it can be relatively simple to replace them, and the new window is usually able to fit into the frame of the previous one easily. However when you have double pane windows that are held in place by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this situation you'll need find some plastic spacers that will assist the new pane to fit perfectly into the window frame.
If you are going to try to remove the window panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor which could cause them to be trampled.
It's a great idea cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, as this will offer the best of both worlds.
2. Sagging
uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sliding. A sagging uPVC window can cause problems with light, draughts, and even security. It's important to take action when you discover that your uPVC windows are sliding.
Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to unblock the windows so you can get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in place.
If you aren't able to move the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. It is important to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.
uPVC handles can also loosen up. Most often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The corner joints of the sash must align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.
3. Water Leaks
If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.
This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on how serious the issue is, the old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.
Verify that the drainage holes do not have debris inside them and that the sill pan is angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.
Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.
If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties read more of your windows.
4. Faulty Hinges
Hinges could be at fault if your uPVC window is difficult to open or it blows open with the breeze. They can be replaced by any competent DIYer and can be completed in just a few minutes.
Like any mechanical component hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a simple process but it can be simpler with someone else to help you hold the frame in place.
Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.
The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or by improper installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to provide assistance.
Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different things. The hinges may also become unbalanced due to wear, which can cause gaps between the frame and sash. They can be fixed by giving them a good clean, but when they're beyond repair, it could be necessary to get them realigned or replaced. The second is the interlock, which is on the hinge side of the window, may also be misaligned, and again it is possible to give them a good clean, but in some instances it could be necessary to have these replaced.
These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease draughts.
Another, and most effective ways to cut down on drafts is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking out cold air.
With a little maintenance and repair windows made of upvc will provide excellent insulation and security for your home. However, it is important to realize that windows last for a certain period of time and they may reach a point where it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as you can.